Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Cisco IOS + DNAT

My network...

LAN B - 192.168.10.0 --> Server VPN OPENSWAN --> INTERNET --> ROUTER 2800 --> LAN A - 192.168.20.0

Need to do a DNAT that LAN A be able to connect on a specific port with a host at LAN B using the cisco router ip.

All info abou DNAT i could find was about PIX, any clues on IOS?

tks!!

Any ideias?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: Cisco IOS + DNAT

On the 2800 router

ip nat inside source static 192.168.10.10 2001 195.76.11.1 25

where 195.76.11.1 is the 2800 router interface and port 2001 is the port you want.

Jon

3 REPLIES
Hall of Fame Super Blue

Re: Cisco IOS + DNAT

On the 2800 router

ip nat inside source static 192.168.10.10 2001 195.76.11.1 25

where 195.76.11.1 is the 2800 router interface and port 2001 is the port you want.

Jon

Community Member

Re: Cisco IOS + DNAT

do i need to set

int fast 0/1

ip nat outsite

int fast 0/0

ip nat inside?

tks!

Hall of Fame Super Blue

Re: Cisco IOS + DNAT

Oops sorry, yes you need to do that.

Jon

2526
Views
0
Helpful
3
Replies
CreatePlease to create content