Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco Pix 515e ASDM bin File

I have an old Cisco PIX-515E, 128 MB RAM for my test environment.

I have update the Pix to "Cisco PIX Security Appliance Software Version 8.0(4)3"

But now i need the ASDM image file. Can somebody send me these file?


Hardware:   PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB

Encryption hardware device : VAC+ (Crypto5823 revision 0x1)
 0: Ext: Ethernet0           : address is 0014.6af2.ee66, irq 10
 1: Ext: Ethernet1           : address is 0014.6af2.ee67, irq 11
 2: Ext: Ethernet2           : address is 000d.8810.8458, irq 11
 3: Ext: Ethernet3           : address is 000d.8810.8459, irq 10
 4: Ext: Ethernet4           : address is 000d.8810.845a, irq 9
 5: Ext: Ethernet5           : address is 000d.8810.845b, irq 5

Licensed features for this platform:
Maximum Physical Interfaces  : 6
Maximum VLANs                : 25
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Enabled
Cut-through Proxy            : Enabled
Guards                       : Enabled
URL Filtering                : Enabled
Security Contexts            : 2
GTP/GPRS                     : Disabled
VPN Peers                    : Unlimited

This platform has an Unrestricted (UR) license.



thx ;)

Everyone's tags (3)
VIP Green

You will need a Cisco service

You will need a Cisco service contract in order to have access to the software downloads, or contact your local Cisco partner for assistance.



Please remember to rate and select a correct answer


Please remember to rate and select a correct answer
CreatePlease to create content