Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Pix 515E PDM or Web Gui

I don't have much experience with firewalls so I'm trying to find out how I can manage a Pix 515e via a Gui or a web front end, whilst I try and get my head around the cli.

I've seen posts about a PIX pdm but I cannot find where to download it. I'd also need some details on how to install/enable it.

some details from sh ver:

Cisco PIX Security Appliance Software Version 8.0(4)

Compiled on Thu 07-Aug-08 19:42 by builders
System image file is "flash:/image.bin"
Config file at boot was "startup-config"

pix01 up 286 days 0 hours
failover cluster up 1 year 223 days

Hardware:   PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0xfff00000, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB

 

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Green

The PIX was end of life / end

The PIX was end of life / end of support last year, So there is no support from Cisco on this product any more.

However you can download the PDM here, but you are required to have a valid Cisco support contract to be able to download it.

--

Please remember to select a correct answer and rate helpful posts

--

Please remember to rate and select a correct answer
7 REPLIES
VIP Green

The PIX was end of life / end

The PIX was end of life / end of support last year, So there is no support from Cisco on this product any more.

However you can download the PDM here, but you are required to have a valid Cisco support contract to be able to download it.

--

Please remember to select a correct answer and rate helpful posts

--

Please remember to rate and select a correct answer
New Member

ah we actually have a copy of

ah we actually have a copy of this in our software share along with pix804.bin.

what is the procedure to install this?

 

 

VIP Green

You can find installation

You can find installation instruction at the following URL:

http://www.cisco.com/en/US/docs/security/pix/pix63/pdm30/installation/guide/pdm30CH3.html#wp1002608

--

Please remember to select a correct answer and rate helpful posts

--

Please remember to rate and select a correct answer
New Member

great thanks for your help.

great thanks for your help.

VIP Green

Any time, Thank you for the

Any time, Thank you for the rating smiley

--

Please remember to rate and select a correct answer
New Member

1 issue is that these

1 issue is that these instructions seem to be for a new device as it says run setup, which I don't want to do.

once I do this:

copy tftp://Your_TFTP_Server_IP_Address/Your_pdmfile_name flash:pdm

what would be the next step?

VIP Green

Try the following (where the

Try the following (where the management IP/subnet is the IP or subnet that is allowed to manage the firewall and "inside" is the interface name management traffic is entering the firewall):

http server enable

http <management IP/subet> inside

aaa authentication http console LOCAL

username cisco password cisco

--

Please select a correct answer and rate helpful posts

--

Please remember to rate and select a correct answer
722
Views
0
Helpful
7
Replies
CreatePlease login to create content