03-04-2008 10:47 PM - edited 03-11-2019 05:12 AM
Hi,
Can some one tell me how to configure both site to site VPN and Remote VPN in PIX 515 E (in a single pix device)? Currently the IOS version in the pix is 6.3(3).Thanks
Rgds,
KTR
Solved! Go to Solution.
03-06-2008 04:02 PM
This page should help you out, but please note that the extra authentication bits are not required. See below for commands not required for your configuration (simply leave them off)
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml
NOT REQ'D:
HUB PIX:
aaa-server mytacacs protocol tacacs+
aaa-server mytacacs (inside) host 10.48.66.102 cisco timeout 5
crypto map mymap client authentication mytacacs
03-06-2008 04:02 PM
This page should help you out, but please note that the extra authentication bits are not required. See below for commands not required for your configuration (simply leave them off)
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml
NOT REQ'D:
HUB PIX:
aaa-server mytacacs protocol tacacs+
aaa-server mytacacs (inside) host 10.48.66.102 cisco timeout 5
crypto map mymap client authentication mytacacs
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: