Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco PIX 515E (VPN Configuration)

Hi,

Can some one tell me how to configure both site to site VPN and Remote VPN in PIX 515 E (in a single pix device)? Currently the IOS version in the pix is 6.3(3).Thanks

Rgds,

KTR

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Cisco PIX 515E (VPN Configuration)

This page should help you out, but please note that the extra authentication bits are not required. See below for commands not required for your configuration (simply leave them off)

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml

NOT REQ'D:

HUB PIX:

aaa-server mytacacs protocol tacacs+

aaa-server mytacacs (inside) host 10.48.66.102 cisco timeout 5

crypto map mymap client authentication mytacacs

1 REPLY
New Member

Re: Cisco PIX 515E (VPN Configuration)

This page should help you out, but please note that the extra authentication bits are not required. See below for commands not required for your configuration (simply leave them off)

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtml

NOT REQ'D:

HUB PIX:

aaa-server mytacacs protocol tacacs+

aaa-server mytacacs (inside) host 10.48.66.102 cisco timeout 5

crypto map mymap client authentication mytacacs

421
Views
0
Helpful
1
Replies
CreatePlease to create content