Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Pix 6.3 VPN Question

It has been years since I remember doing this, but I recall being able to do a show vpdn tunnel summary to be able to list the currently logged-in RAS VPN Tunnel users. However it does not seem to be working on a Pix 515 that I have been trying it on. I may be using the incorrect command/syntax and would help with a nudge in the right direction.

2 REPLIES
Cisco Employee

Re: Cisco Pix 6.3 VPN Question

Hi,

Below are some show vpdn commands in Pix 6.3

show vpdn tunnel [l2tp|pptp|pppoe] [id |packets|state|summary|transport]

show vpdn session [l2tp|pptp|pppoe] [id |packets|state|window]

show vpdn pppinterface [id ]

show vpdn group []

show vpdn username [user_name]

Regards,

Arul

*Pls rate if it helps*

New Member

Re: Cisco Pix 6.3 VPN Question

As I stated in my original post.. I was under the impression that show vpdn tunnel summary was the command to list the tunnels and their respective users.. However after trying that command it returns literally nothing to the output window. My goal is to gather a list of the VPDN users on the Cisco Pix firewall so that I can see who is logged/authenticated into the remote VPN sessions.

108
Views
0
Helpful
2
Replies
CreatePlease to create content