Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco process when mixing firewall, ACL, QoS, VPN IPSec etc.

Recently, I have a question when I prepare a case which implement firewall (such as CBAC or  ZBF), normal ACL, QoS, IPS and IPSec in a single router, for example, on  a particular interface for ingress traffic, how will router process the  traffic according to above setting. That is, what kinds of process order  the router will follow? If you have some information, it is very appreciated.

2 REPLIES
Hall of Fame Super Blue

Re: Cisco process when mixing firewall, ACL, QoS, VPN IPSec etc.

qiangwucisco_au wrote:

Recently, I have a question when I prepare a case which implement firewall (such as CBAC or  ZBF), normal ACL, QoS, IPS and IPSec in a single router, for example, on  a particular interface for ingress traffic, how will router process the  traffic according to above setting. That is, what kinds of process order  the router will follow? If you have some information, it is very appreciated.

Have a look at this doc which lists the order of operation of processes on an IOS router -

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080133ddd.shtml#topic1

Jon

New Member

Re: Cisco process when mixing firewall, ACL, QoS, VPN IPSec etc.

Thanks, Jon. It sounds helpful. I will read it carefully.

Cheers

265
Views
0
Helpful
2
Replies