cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
747
Views
0
Helpful
2
Replies

Cisco VPN Client issue while changing the vpn pool

vinodk_gupta
Level 1
Level 1

Hi,

We have already implemented Cisco client VPN service on Cisco ASA. My Cisco VPN ip pool is configured 174.26.4.0/22 & My corporate network pool is 172.26.4.0/22. which is working perfectly.

My concern is VPN pool 174.26.4.0/22 is comes under public range so i want to change this pool into private range (172.30.100.0/24)

so i changed below configuration.

no access-list nonat extended permit ip 172.26.4.0 255.255.252.0 174.26.4.0 255.255.252.0
no ip local pool testpool 174.26.4.0-174.26.4.253

access-list nonat extended permit ip 172.26.4.0 255.255.252.0 172.30.100.0 255.255.255.0
ip local pool testpool 172.30.100.1-172.30.100.254

After changing, i am able to connect vpn & vpn machine got ip address 172.30.100.1.

during VPN connection, vpn machine (172.30.100.1) is pinging from corporate network & even take the remote also but from VPN machine (172.30.100.1) I am not able to ping corporate network.

i am not able to understand where is my mistake?

Please help us

Regards

vinod Gupta

9810966625

2 Replies 2

joseph.steve
Level 1
Level 1

Paste your full configuration

Config will definitely help but did you check if the VPN client getting corp network routes? Check the splittunnel settings.

thx

MS 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card