Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Cisco VPN Client issue while changing the vpn pool

Hi,

We have already implemented Cisco client VPN service on Cisco ASA. My Cisco VPN ip pool is configured 174.26.4.0/22 & My corporate network pool is 172.26.4.0/22. which is working perfectly.

My concern is VPN pool 174.26.4.0/22 is comes under public range so i want to change this pool into private range (172.30.100.0/24)

so i changed below configuration.

no access-list nonat extended permit ip 172.26.4.0 255.255.252.0 174.26.4.0 255.255.252.0
no ip local pool testpool 174.26.4.0-174.26.4.253

access-list nonat extended permit ip 172.26.4.0 255.255.252.0 172.30.100.0 255.255.255.0
ip local pool testpool 172.30.100.1-172.30.100.254

After changing, i am able to connect vpn & vpn machine got ip address 172.30.100.1.

during VPN connection, vpn machine (172.30.100.1) is pinging from corporate network & even take the remote also but from VPN machine (172.30.100.1) I am not able to ping corporate network.

i am not able to understand where is my mistake?

Please help us

Regards

vinod Gupta

9810966625

2 REPLIES
Community Member

Cisco VPN Client issue while changing the vpn pool

Paste your full configuration

Cisco VPN Client issue while changing the vpn pool

Config will definitely help but did you check if the VPN client getting corp network routes? Check the splittunnel settings.

thx

MS 

251
Views
0
Helpful
2
Replies
CreatePlease to create content