I have two remote vpn subnets that need to communicate. I have my access list as
access-list No-NAT extended permit ip 172.16.140.0 255.255.255.0 172.18.3.0 255.255.255.0, however this does not seem to do the trick. Could these VPN's be terminating on different interfaces such as one external, one DMZ?
Re: Communicating between remote access VPN subnets
Yes, they are both remote. I have the following split-tunnel acl:
access-list Indy-Remote_splitTunnelAcl_1 line 28 extended permit ip 172.18.0.0 255.255.0.0 172.16.140.0 255.255.255.0 (hitcnt=0) 0x5a58ce89
The main issue is i have users on the 172.18 subnet using IP communicator trying to contact users on the 172.16 subnet also using IP communicator. They cannot hear each other. The Call Manager server is located with the ASA, so I wouldn't think there would be enough delay to the packets to cause this issue.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...