The above doesn't make sense. The inside n/w is 10.0.0.0/24 but, then this static says make the inside n/w 192.168.0.0/24 to look like 10.0.0.0/24 in the dmz. May be 192.168.0.0/24 lives on the inside as well.
Now, if the above is true then the acls are incorrect. The acls are talking about 192.168.0.1 for destination from the dmz which has to be 10.0.0.1 as the dmz will see the 192.168.0.0/24 as 10.0.0.0/24 so the destination should be 10.0.0.1 instead.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...