Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Config Files

Can someone help me please? I know nothing about firewalls and I need to copy a config froma loan fierwall I have; over to my repaired unit.

I've used Telnet to get into the loan machine, and I've copied the full config into a Notepad document. I've got the console cable and attached it to my laptop so I can gain access to the unit from Hyperterminal, but how do I go about copying the config file over to my repaired PIX 515 unit? Incidentally both the loan unit and the repaired unit are running OS V6.3.

Any help would be appreciated.

Kind regards

Danny

1 REPLY
Hall of Fame Super Silver

Re: Config Files

Danny

If you have the config in notepad you should be able to access the repaired unit, get into privilege mode, go into config mode, and paste the config back. Especially since both machines are running the same OS there should not be issues about command compatibility.

The main issue that I see in this has to do with passwords (we do not know at this point how many passwords you may have configured - for example do you have VPN users configured with their passwords). When you show the config and copy and paste it, the PIX does not show crypto text (as routers do), so when you paste the config in it does not have any useable information about the content of the passwords.

If you use TFTP to copy the config from the loaner to some server (perhaps even your own PC with freeware TFTP server) and then copy it to the repaired unit, then you should get the entire config including passwords.

HTH

Rick

110
Views
0
Helpful
1
Replies
CreatePlease login to create content