configration of ASA5510

[k.oda]

I have ASA5510 and short configration as below

interface Ethernet0/1
speed 100
duplex full
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/2
speed 100
duplex full
nameif inside2
security-level 100
ip address 192.168.10.1 255.255.255.0

same-security-traffic permit inter-interface

--------------------------------------------------------------------------

I wanto to connect from 192.168.1.10 which is under Ethernet0/1 to 192.168.10.10 which is under Ethernet0/2.

But I could not.

Do I need to add any configration?

[riccardo-patti]

What can you in the log when you try to route traffic from one interface to the other?

[k.oda]

This is ASA configration.

Should I use subinterface?

[riccardo-patti]

You are not obliged to use subif, try to issue the "no nat-control" command

[k.oda]

But I am using nat function because there is a mail server under inside interface.

[riccardo-patti · Accepted solution]

So you have to declare nat exemptions for both networks on both interface