Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuration assistance Cisco PIX 501 6.3

I have two Internal hosts that I would like to nat them but every time I'm trying to add the second host I'm getting a duplicate of existing static error.

I also tried to create a group for this two hosts and add them statically into the nat rules but the same thing.

Internal IP address

192.168.11.122

192.168.11.20

I have this configuration into the PIX

global (outside) 1 192.168.100.1
static (inside,outside) 192.168.100.1 192.168.11.122 netmask 255.255.255.255 0 0

here is the error when I'm adding the second host

DC1N-AZAOC-PIX-02(config)# static (inside,outside) 192.168.100.1 192.168.11.20 netmask 255.255.255.255
ERROR: duplicate of existing static

from inside:192.168.11.122 to outside:192.168.200.3 netmask 255.255.255.255
Usage: [no] static [(real_ifc, mapped_ifc)]
{<mapped_ip>|interface}
{<real_ip> [netmask <mask>]} | {access-list <acl_name>}
[dns] [norandomseq] [<max_conns> [<emb_lim>]]
[no] static [(real_ifc, mapped_ifc)] {tcp|udp}
{<mapped_ip>|interface} <mapped_port>
{<real_ip> <real_port> [netmask <mask>]} |
{access-list <acl_name>}
[dns] [norandomseq] [<max_conns> [<emb_lim>]]

Please help

1 REPLY
Hall of Fame Super Silver

Duplicate post.

Duplicate post.

Answered here:

https://supportforums.cisco.com/discussion/13294691/pix-firewall-config-setup-static-nat-pix-501-63

1
Views
0
Helpful
1
Replies