Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuration Changes logging issue, ASDM related?

I've run into an interesting problem.

ASA: 8.4(2)

ASDM: 6.4(5)

When I make a change at the CLI, syslog message ASA-5-111008 is generated and sent to the syslog servers, local buffer, and ASDM.

When I make a change in ASDM, syslog message ASA-5-111008 is  generated and sent to the local  buffer and ASDM. It is NOT sent to the syslog server.

Here's my logging config...

Firewall# sh run logging

logging enable

logging timestamp

logging standby

logging buffer-size 409600

logging buffered informational

logging trap notifications

logging asdm notifications

logging host Inside xx.xx.xx.AA 6/1468

logging host Inside xx.xx.xx.BB 6/1468

logging flash-minimum-free 10240

logging flash-maximum-allocation 10240

logging permit-hostdown

Surely I'm missing something obvious.  Is this a known bug?

Thanks!

2 REPLIES
Hall of Fame Super Silver

Configuration Changes logging issue, ASDM related?

Not sure about a bug - there is a very similar one open and documented in the ASA release notes - CSCtx16166

Note your ASDM version is a few back from the latest. I'd load up ASDM 6.4(7) just for grins and see if it behaves the same.

New Member

Configuration Changes logging issue, ASDM related?

Ha, I did upgrade just a few minutes ago, but same result.

That does look similar, and so does ...

CSCth14248 ASA not sending all logging messages via TCP logging

Looks like I'll need to upgrade to 8.4(3) to fix these and see how it goes.

thanks!

1129
Views
1
Helpful
2
Replies
CreatePlease login to create content