This document describes how to configure the basic configuration of the Firewall Services Module (FWSM) installed either in the Cisco 6500 Series Switches or Cisco 7600 Series Routers. This includes the configuration of the IP address, default routing, static and dynamic NATing, Access Control Lists (ACLs) statements in order to allow the desired traffic or block the unwanted traffic, application servers like Websense for the inspection of the internet traffic from the inside network, and the Webserver for the Internet users.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...