Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Configure SNMP Community on Cisco Catalyst 3560-x Series

Hi Guys,

Can you help me out, how to configure SNMP Community with Read Only priviledge

with my Cisco Catalyst 3560-x Series.

Regards,

Manuel

Everyone's tags (4)
1 REPLY
VIP Purple

Re: Configure SNMP Community on Cisco Catalyst 3560-x Series

here is a reference for SNMP, it's not that complicated. And looking into SNMPv3 could be also a good idea:
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/12.2_58_se/configuration/guide/swsnmp.html#wp1019932

And please move your post to "LAN Switching" as it has nothing to do with firewalling.


Sent from Cisco Technical Support iPad App

167
Views
0
Helpful
1
Replies
CreatePlease to create content