Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuring an ASA 5510

Greeting everyone!

I have a problem configuring an ASA 5510 for our client network. The idea is to protect the core ( network) from the following:-

(1) A broadband connection with a static IP (, whose sole purpose is to make available the Application Server ( to the Internet. This connection is not to be used by any 192.168.20.XXX user for Internet connectivity.

2) A connection from the local ISP ( network) which is supposed to be the gateway to Internet for all 192.168.20.XXX users. Vital Info:

gateway -

dns -

proxy - port 8080

3) All other WAN connections terminating in this core network, such as networks,,, etc.

Is it possible to make the ASA serve in this scenario

New Member

Re: Configuring an ASA 5510

Hi, ASA router ?

Is ur setup going to be like this

remote network and asa inside ip is and outside network is and only server will access the .

What will be the public ip for the 192.168 series and also the public ip for the 10 network

If u are going to use 2 isp at one time that has to be done on the isp router ,but in case u use if one isp is down u can then fallback on the other isp