Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Configuring ASA5505 for DMZ

I have bought an ASA5505-UL-BUN-K9. When trying to configure the DMZ interface, I get this message: "According to the available licence, I must block the traffic from DMZ to an interface (inside or outside)" I have chosen to block the traffic from DMZ to the inside. Now I need some servers on DMZ to communicate with some servers on the inside interface. My question is: is this operation possible with such a product, or shall I buy a full licence for DMZ?

Kind regards

Mirco Frazzoni

2 REPLIES

Re: Configuring ASA5505 for DMZ

Mirco,

It is possible , but based on licensing documentation the current license you have does not provide for full DMZ support for that you need Security plus license ASA5505-SEC-BUN-K9, refer to latest cisco license specs.

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd8048dba8.html

-HTH

Jorge

Community Member

Re: Configuring ASA5505 for DMZ

Jorge,

Thanks for your help.

Best Regards

Mirco Frazzoni

228
Views
0
Helpful
2
Replies
CreatePlease to create content