Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Configuring FWSM multiple contexts on 6509.

I have configured FWSM to firewall my serverfarm. On the server farm i have different servers running different OS platforms. I have experienced difficulties with servers running linux/unix OSs.For a start i have allowed all IP and ICMP traffic to and out of the serverfarm VLAN for testing. I can pass traffic on all Windows platforms but not the linux ones. I have correct gateway addresses configured and NAT0 configuration. What do i need to do to pass traffic successfully.

Regards

Winnie.

6 REPLIES
Hall of Fame Super Blue

Re: Configuring FWSM multiple contexts on 6509.

Hi

From the title is it safe to assume you have the linux/Unix machines on a different context ?

Could you send copies of windows and unix contexts (minus any sensitive info).

Jon

New Member

Re: Configuring FWSM multiple contexts on 6509.

Thanks for your reply Jon,

We have all the servers on the same context.

Rgds

Winnie.

New Member

Re: Configuring FWSM multiple contexts on 6509.

Hi Jon,

Are you there still waiting for your reply.

Winnie.

Hall of Fame Super Blue

Re: Configuring FWSM multiple contexts on 6509.

Winnie

Did you by any chance rate my previous post as a 1 ?

Jon

Re: Configuring FWSM multiple contexts on 6509.

on FWSM

conf t

logg on

logg mon 7

after that initiate some traffic from linux/unix server and analyse getting loggs.

New Member

Re: Configuring FWSM multiple contexts on 6509.

Thanks,

i will get back when i get the logs.

308
Views
6
Helpful
6
Replies
CreatePlease to create content