Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

configuring VOIP on asa 5500

Hi all

guys iam i intial stage of using asa and voip. help me out.

we have to set up voip for our network(for 50 phones not he cisco phones).

i need to just the route the voip traffic to gateway address of telephonic company(1.1.5.7)  where they provide us the connectivity for the setination call.

what sort of protocols should i have to enable in pix

i saw the concepts like sip, h323, ras, skinny.

---note: provide me the configuration which will be helpful to me. and we are using only voip for asa and no data or other traffic should be allowed.

inside adrees: 10.10.10.0/24 for all voip phones

outside:121.21.22.1

telephoneic gateway: 1.1.5.7

thanks & regards

srikanth

1 REPLY

configuring VOIP on asa 5500

Hello,

Routing voip traffic to 1.1.5.7. The question how you are planning to route? Work with the telephone company on what kind of access they allow- requests via internet or they want you to create a vpn tunnel or they want your call server to talk to their gateway etc. As far as inside hosts (phones in your case) reaching out to the address thru ASA- Unless you got specific ACL for inside -> outside traffic, the phone should reach (via ASA default route).

hth

MS

528
Views
0
Helpful
1
Replies