Whether it is possible to connect Management 0/0 Interface port of ASA 5512-X to GigabitEthernet port on same ASA to manage IPS module?
ASA work in transparent mode, I want to assigns interfaces GE0/0, GE0/1 and GE0/2 to bridge-group 1. Interface GE0/0 for LAN connection, GE0/1 - for Server connection, and GE0/2 - for connect to Management 0/0 on same ASA.
IP 10.0.0.1/24 - geteway in LAN, 10.0.0.2 - Server, 10.0.0.3 - bridge-group 1 BVI, 10.0.0.4 - IPS module.
ASA soft - v9.0, IPS - v.7.1
Separate cable for management of IPS module is impossible now.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...