I cannot establish connection from inside of ASA to a outside specific web server 18.104.22.168. I did a capture, but no traffic coming back from the web server was captured, traffic to the server on both inside and outside interfaces were captured. But 'show access-list web-cap' shows some hits coming from the server to the clients. How to explain this?
'show conn' command shows flags saA for a few seconds.
I have no problems accessing all other web sites, such as Cisco.com .... I do not have rules to block the traffic to/from 22.214.171.124.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...