Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Console message timestamp on PIX-501 IOS 6.3(5)

How can I enable timestamp for console messages?

Pix(config)# sh logg

Syslog logging: enabled

Facility: 6

Timestamp logging: enabled

Standby logging: disabled

Console logging: level informational, 23 messages logged

Monitor logging: disabled

Buffer logging: level debugging, 512 messages logged

Trap logging: level informational, 323 messages logged

History logging: level warnings, 100 messages logged

Device ID: disabled

discarded from 192.168.165.49/68 to inside:255.255.255.255/bootps

302014: Teardown TCP connection 0 for outside:192.168.177.11/5000 to inside:172.31.2.149/1362 duration 0:02:01 bytes 0 SYN Timeout

302010: 0 in use, 1 most used

710005: UDP request discarded from 192.168.165.50/68 to inside:255.255.255.255/bootps

710005: UDP request discarded from 192.168.165.50/68 to inside:255.255.255.255/bootps

710005: UDP request discarded from 192.168.165.48/68 to inside:255.255.255.255/bootps

710005: UDP request discarded from 192.168.165.48/68 to inside:255.255.255.255/bootps

Thank you in advance.

2 REPLIES
Gold

Re: Console message timestamp on PIX-501 IOS 6.3(5)

logging timestamp

New Member

Re: Console message timestamp on PIX-501 IOS 6.3(5)

I have "logging timestamp" statement configured. However, I believe this is for syslog messages sent to syslog server.

Regards,

Santi

293
Views
0
Helpful
2
Replies
CreatePlease to create content