07-14-2009 04:54 AM - edited 03-11-2019 08:54 AM
I'm trying to copy an capture I've done in an ASA with multiple contexts.
The problem is that inside a context I don't have the command "copy capture:"
The only options for copy command inside a context are "copy running tftp" and "copy startup tftp"
Solved! Go to Solution.
07-14-2009 05:46 AM
Hi Guilherme,
To copy a capture in multiple context mode, you use the 'copy capture' command from the system context and specify the context where the capture is contained. For example:
copy capture:context1/cap1 tftp://10.1.1.1/cap1
You can also download it directly from a browser by navigating to:
https://
Here is the command reference for 'copy capture':
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2123161
Hope that helps.
-Mike
07-14-2009 05:46 AM
Hi Guilherme,
To copy a capture in multiple context mode, you use the 'copy capture' command from the system context and specify the context where the capture is contained. For example:
copy capture:context1/cap1 tftp://10.1.1.1/cap1
You can also download it directly from a browser by navigating to:
https://
Here is the command reference for 'copy capture':
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/c4.html#wp2123161
Hope that helps.
-Mike
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: