cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
221
Views
0
Helpful
1
Replies

Create vlan

siliconmaster1
Level 1
Level 1

Hi, I'm trying to setup a new vlan for guest wifi network using the asdm. I've got a 5510 with a security plus license so I know my vlan limit is at 100. In asdm I go to configuration --> interfaces and I've already got all the physical vlans in use. e0/0 is my inside, e0/1 is out, e0/2 is for my redundant ISP link and e0/3 is used for HA failover between two asa's. How can I create this additional vlan when they're all in use however the limit is 100? I don't believe I would need a physical cable to go from one of the interfaces on the asa to the switch in order to make the guest wifi work, correct? I'm following this guide btw: http://itguy11.wordpress.com/2010/07/21/guest-wireless-access-using-a-cisco-asa-5510-with-vlan-configuration/

Thanks for all the help.

1 Reply 1

Marvin Rhoads
Hall of Fame
Hall of Fame

You use subinterfaces and trunk the VLANs onto them.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: