I have two pix with a tunnel between them and both have full access to outside. As it is today all local networks use the local pix to get access to outside. What I would like to do is to route all outgoing traffic for one port via a dedicated gateway.
E. g. all http traffic should always go out via pix1 even if the local network is behind pix2.
No, it is not possible. Are you trying to route your mail / specific production traffic through PIX2 and internet through PIX1? If yes, you can add routes on your PIX2 to route mailserver and production traffic through PIX2 outside and the 0 0 to PIX1.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...