I've read several postings about first time deployment of the FWSM and I still have some doubts, what I need to do is deploy 2 FWSM in active/active mode (2 6509's load balanced at L2 and L3) and also in transparent mode, I have 20+ vlans in the inside and rules need to be created for some specific vlan-x to vlan-y traffic, MSFC has SVI for the inter vlan traffic. If anyone has deployed this before and have a configuration or any type of transparent firewall configuration I would really appreciate if you could post it (except confidential info) I can guide myself better by looking at a configuration, thanks again.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...