Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

DHCP Client still getting the same IP

Dear All,


DHCP client is directly connected to the FWSM interface vlan 100, and DHCP server is also directly connected to interface vlan 200. FWSM act as a DHCP relay agent only.


We have reserved the IP & MAC for one of our DHCP client in microsoft DHCP server. But we are not getting the new IP. We have released/renew the IP from the client and server as well. But still we are getting the previous IP not the reserved one.


Is it possible that FWSM is giving the old IP to the client instead of the new IP and does not relay the request to the DHCP server for the same user (MAC) ?

Regards,

Anser


2 REPLIES
Cisco Employee

Re: DHCP Client still getting the same IP

I don't think so.  Did you clear the old IP assignment from the DHCP allocated pool in the DHCP server?

Only captures ingress and egress on the FWSM can say what the server sent for an IP address.

-KS

Re: DHCP Client still getting the same IP

We found the issue. Issue was related to DHCP server.

Thanks,

Anser

197
Views
0
Helpful
2
Replies