I have about 5 users who need to VPN. They all come in just fine, and hit devices on the 192.168.7.x network.
Now I have a user who needs to be able to map a drive to a 192.168.10.x network. Because I only want HIM to be able to hit the 10.x network, I don't want to just blanketly open the PIX to all networks.
How would I do it so everyone else keeps getting access to the 7.x network, but only Jim has access to the 10.x network??
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...