I have a Cisco PIX 515E router with an unrestricted license. My internal users can access the internet via the leased line router connected to the outside interface. The DMZ users currently get out to the internet the same way. However, I have been asked to give them Internet access through another internet router. I have connected the other Internet router to another interface and have used nat(dmz)2 and global(dmz2)2 to translate the addresses. Is this correct? Can I have another default route pointing to the second Internet router i.e route DMZ2 0 0 x.x.x.x ?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...