Im not much of this device, I am seeking help with regards to my simple issue and hopefully someone will get to help. Basically I have a LAN IP of 192.168.2.0/23 from our network. Since I am the System Admin of the company, I have created Application control rules to be restricted for the end users specifically connected to LAN port 2 and I have created my own port on LAN 4 of the device configured as DMZ with an IP pool of 192.168.100.0/23. Now, my problem is I cannot reach these 2.0/23 subnet devices not either on Ping command. I badly need to access this for my monitoring and configuring purposes. I am not so sure of these will fall under NAT routing, ACL list or whatsoever. Please ask question if you need more clarification on our network scenario. Hope to find answers on this forum.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...