Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

DNAT / SNAT

Hi

Consider I got static NAT for a host on ASA, then traffic from outside to inside is DNAT and traffic inside to outside is  SNAT.

Is the above correct

Thanks

Mel

1 REPLY
Cisco Employee

Re: DNAT / SNAT

Yes, you are right.

Example:

static (inside,outside) 200.1.1.1 10.1.1.1 netmask 255.255.255.255

Outbound traffic from inside to outside, 10.1.1.1 will be NATed to 200.1.1.1

Inbound traffic from outside to inside towards 200.1.1.1 will be NATed back to 10.1.1.1

1090
Views
0
Helpful
1
Replies
CreatePlease to create content