I planned to test the DR site communication for particular application. Here, I am using PIX 535 with around 4 DMZ's. Our WAN Network is amoung the one DMZ, at the same time my DR site is also belongs to the same DMZ.
Normal dada flow would be,
we have another firewall(PIX 501) for DR Site commnucation, on the Indside Zone of the Core Firewall.
Kindly suggest, how can route the specfic traffic to the DR Site Firewall(PIX 515), with out bypassing the Core Firewall(PIX 535). All other traffic sould be allowed by Core Firewall for the Normal operation.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...