Re: dual asa failover on dual cores using routed interfaces inst
using dual core 6509s, can failover be configured on both asa's when using routed interfaces on the core switches instead of using HSRP and L3 vlan?
is there a config / white paper on how to configure this?
Probably need a bit more info to understand exactly how you want to set it up but the key point to rememeber is that failover requires L2 adjacency between the 2 ASAs because each corresponding interface on both the active/standby firewalls are in the same subnet.
By the sounds of it you are not proposing to have L2 adjacency beween the ASA devices ?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...