Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Dual WAN, PIX 515E

Hello all,

I just have a general question.

I do not have a lot of experience with PIX firewalls. I have a PIX 515E running IOS 7.1 with an expansion NIC card (inf2).

I also have two WAN connections, I'll just call them Cable and DSL for simplicity.

I want the Cable connection to be primary and have DSL be there for redundancy. So if at any point the Cable connection goes down, it will automatically fail-over to the DSL side.

Could someone maybe post a how-to or best-practices for what I'm wanting to do?

Any personal tips and/or experiences would also be greatly appreciated. I've never set this up before, but I'd like to do some reading up before I dive in.

Any tips would be greatly appreciated.

-Scott

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Dual WAN, PIX 515E

Hi, have you come across this link, you can use SLA monitor / object tracking

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

2 REPLIES

Re: Dual WAN, PIX 515E

Hi, have you come across this link, you can use SLA monitor / object tracking

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtml

New Member

Re: Dual WAN, PIX 515E

Yes!

This looks to be it!

Thanks so much.

899
Views
0
Helpful
2
Replies
CreatePlease to create content