Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Error: mapped-address conflict with existing static

On FWSM, I am getting the error in subject.

Existing NAT Command:

static (DMZ2,DMZ3) 192.168.30.0 10.0.30.0 netmask 255.255.255.0

New NAT Command:

static (OUTSIDE,DMZ3) 192.168.30.121 172.16.100.121

Why should this give a conflict error since I am using the second NAT on different interface i.e. OUTSIDE. So different NAT IPs for different interfaces..isn't that permissible. The NAT entry however is added to the config after displaying the error.

274
Views
0
Helpful
0
Replies
CreatePlease to create content