Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

ERROR: mapped-address conflict

When I try to add a second PAT statement I get the following ERROR:

ERROR: mapped-address conflict with existing static

inside:A.B.C.D to outside:DEVICE 1_Public netmask 255.255.255.255

The existing config is:

static (inside,outside) tcp DEVICE 1_Public https DEVICE 1_Private 8443 netmask 255.255.255.255

static (inside,outside) tcp DEVICE 1_Public ssh DEVICE 1_Private ssh netmask 255.255.255.255

static (inside,outside) DEVICE 1_Public DEVICE 1_Private netmask 255.255.255.255

I'm trying to add

static (inside,outside) tcp DEVICE 1_Public 44324 DEVICE 1_Private 44324 netmask 255.255.255.255

Why can I not add this new line?

1 REPLY

Re: ERROR: mapped-address conflict

I'm guessing that it's because you have a one-to-one mapping already:

static (inside,outside) DEVICE 1_Public DEVICE 1_Private netmask 255.255.255.255

Take the above line out, and you'll be able to add your line. Or, you can remove all of the lines and leave the above line in, and then control access through acls.

HTH,

John

HTH, John *** Please rate all useful posts ***
907
Views
0
Helpful
1
Replies
CreatePlease to create content