Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Error: "Login Denied , unauthorized connection mechanism , contact your administrator"

Per the Cisco site it states that I'm missing some parameters on my config, but doesn't specify what I'm missing.

 

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/100597-technote-anyconnect-00.html#anc41

 

Anyone have any ideas?

 

Thanks in advance!

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

- Check your DAP rules (one

- Check your DAP rules (one by one)

  "debug dap trace" and logs can help you with the troubleshooting

- Check that the .XML profile protocol matches the group policy one in the "server list" section.

 E.g. If you are using IKEv2 make sure that the profile says "IPsec" or "SSL" if the GP says ssl-client

 

If the GP says both, make sure that the XML profile states the protocol that you are planning to use.

 

Hope this helps.

2 REPLIES
Community Member

Version: 9.1.6.1ASDM: 7

Version: 9.1.6.1

ASDM: 7.17

anyconnect version: 3.1.05187 for mac/windows

Community Member

- Check your DAP rules (one

- Check your DAP rules (one by one)

  "debug dap trace" and logs can help you with the troubleshooting

- Check that the .XML profile protocol matches the group policy one in the "server list" section.

 E.g. If you are using IKEv2 make sure that the profile says "IPsec" or "SSL" if the GP says ssl-client

 

If the GP says both, make sure that the XML profile states the protocol that you are planning to use.

 

Hope this helps.

1584
Views
0
Helpful
2
Replies
CreatePlease to create content