Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Error Routing protocol - EIGRP between Cisco ASA with Switch 4506

Dear Cisco Team,

I have problem when I configed EIGRP between cisco ASA 5510 with core switch 4506. This is below error

*Nov  4 05:08:09.898: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency

*Nov  4 05:09:29.409: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is down: retry limit exceeded

*Nov  4 05:09:29.499: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency

*Nov  4 05:10:35.609: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.18 (GigabitEthernet2/42) is down: holding time expired

*Nov  4 05:10:49.009: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is down: retry limit exceeded

*Nov  4 05:10:53.230: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency

quang huy2004: *Nov  4 05:08:09.898: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency

*Nov  4 05:09:29.409: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is down: retry limit exceeded

*Nov  4 05:09:29.499: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency

*Nov  4 05:10:35.609: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.18 (GigabitEthernet2/42) is down: holding time expired

*Nov  4 05:10:49.009: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is down: retry limit exceeded

*Nov  4 05:10:53.230: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency

the tech Spec

ASA,  IOS : 8.0.2

4506, License IP Base; OS: Unisal 15 M.2

I checked between ASA with Router ok; but between ASA with 4506 error

Can you help me ?

1 ACCEPTED SOLUTION

Accepted Solutions

Error Routing protocol - EIGRP between Cisco ASA with Switch 450

Hello,

This logs means that the hold time expired so the hello packets are not being received, usually means multicast packets are missed-224.0.0.10)

I would recommend you to try another cable because this ussualy is a phisical or congestion issue.

Can you try that and let us know the result, also if that does not help can you send us the following outputs:

-Show ip EIGPR neighbors

-Debug EIGRP packet hello

Regards,

Julio

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
1 REPLY

Error Routing protocol - EIGRP between Cisco ASA with Switch 450

Hello,

This logs means that the hold time expired so the hello packets are not being received, usually means multicast packets are missed-224.0.0.10)

I would recommend you to try another cable because this ussualy is a phisical or congestion issue.

Can you try that and let us know the result, also if that does not help can you send us the following outputs:

-Show ip EIGPR neighbors

-Debug EIGRP packet hello

Regards,

Julio

Looking for some Networking Assistance? Contact me directly at jcarvaja@laguiadelnetworking.com I will fix your problem ASAP. Cheers, Julio Carvajal Segura http://laguiadelnetworking.com
1457
Views
0
Helpful
1
Replies