Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Extendending VRF to the FWSM

Hi,

I am trying to setup single context FWSM on 6500. On MSFC I have multiple vlans configured. Also I have VRF configured for Guest and Developers access. I want that all the traffic should go through the FWSM but can not figure out how to do it. I will appreciate any help.

Here is the config for VRF

interface Tunnel409

ip vrf forwarding Guest

ip address 10.1.251.34 255.255.255.252

tunnel source Loopback409

tunnel destination 10.1.251.209

1 REPLY

Re: Extendending VRF to the FWSM

===tunnel======mscf(vrf Guest)=====vlan400=====FWSM

on MSFC

int vlan 400

ip vrf forwarding Guest

ip add 10.0.0.1 255.255.255.248

on FWSM

int vlan400

ip add 10.0.0.2 255.255.255.248

something like this...

133
Views
0
Helpful
1
Replies
CreatePlease login to create content