Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Failover Pair rebooting.

hello,

I have two 515e in a failover pair. One has UR and the other FO licenses. The IOS version is 7.21.

They are failing over every minute or so. When I connected the console, it showed a lot of information like what you get in 'sh tech' and then it rebooted. Same thing is happening with the other device too. I have upgraded them from version 6.3 to 7.21 last week Thursday.

Can someone advise?

Regards.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Failover Pair rebooting.

There was a very common bug related to esmtp inspection. I would first recommend disabling esmtp inspection. Here is how you can do so-

policy-map global_policy

class inspection_default

no inspect esmtp

exit

exit

However, if this does not help, I would request you to provide the log you are getting on console. Basically, it is "traceback". You can also get the same from "show crash".

Regards,

Vibhor.

2 REPLIES
Silver

Re: Failover Pair rebooting.

There was a very common bug related to esmtp inspection. I would first recommend disabling esmtp inspection. Here is how you can do so-

policy-map global_policy

class inspection_default

no inspect esmtp

exit

exit

However, if this does not help, I would request you to provide the log you are getting on console. Basically, it is "traceback". You can also get the same from "show crash".

Regards,

Vibhor.

Community Member

Re: Failover Pair rebooting.

Hi Vibhor,

Many many thanks for your instructions. They really solved my problem. However, I have upgraded the PIX to 7.22 now and it seems to be working fine now.

Regards,

Shoaib.

126
Views
0
Helpful
2
Replies
CreatePlease to create content