07-10-2013 07:37 AM - edited 03-11-2019 07:10 PM
Hi everyone,
ASA is config for failover which is Active /standby.Command line shows failover as active and standby.
But under ASDM,Licensing ,Activation key it show as
Failover | Active/Active |
Is this by design that it show as active/active?
Regards
Mahesh
Solved! Go to Solution.
07-10-2013 07:49 AM
Hi Mahesh,
I think it means that the ASA is licensed to be able to support Active/Active while you have actually set up the ASAs to do Active/Standby
To my understanding for example the ASA5505 model could only support Active/Standby Failover since it doesnt Security Contexts as those are required for an Active/Active setup.
- Jouni
07-10-2013 07:49 AM
Hi Mahesh,
I think it means that the ASA is licensed to be able to support Active/Active while you have actually set up the ASAs to do Active/Standby
To my understanding for example the ASA5505 model could only support Active/Standby Failover since it doesnt Security Contexts as those are required for an Active/Active setup.
- Jouni
07-10-2013 09:38 AM
Many Thanks Jouni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide