Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

feature License

I have a PIX 525 FO with UR license.Its running 6.3(5) code. in show ver it shows VPN-3DES-AES as disabled.

how do i enable it.

2 REPLIES
Hall of Fame Super Blue

Re: feature License

Hi

Do you have a Cisco login. if not you need to register a Cisco account. Go to this page and register

https://tools.cisco.com/SWIFT/Licensing/RegistrationServlet

Once you have a login go to

www.cisco.com/go/license

You will be prompted for you username/password.

Once on this page in the box at the top labelled "Licenses not requiring a PAK" click on the "here for available licenses" link.

Then scroll down to select the 3DES pix firewall license and follow the instructions. You will then be e-mailed with your 3DES update key.

HTH

Cisco Employee

Re: feature License

hi,

you can get 3des license free.However,for AES,you'll have to purchase an additional license.

you can get the 3des by following the instructions in the above message.

the new activation key which is mailed to you can be entered by this command :

activation-key < four tuple key >

Hope this helps!!

Sushil

TAC Engineer

314
Views
0
Helpful
2
Replies
CreatePlease to create content