Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

filtering RIP routes into ospf

folks

i'm doing a bit of lab work and tinkering with gns and route distribution

i'm trying to find the best way to filter routes (on an ASA) in the rip database so that only specific routes are distributed into a particular ospf process - at the minute when i use the redistribute rip subnet command in router ospf the entire RIP database is redistributed

i'm assuming a route map is the best method with an acl but i'm curious if anyone can point me to some specific configuration examples and advise on the best approach

thanks to anyone taking the time to read this or to contribute

greatly appreciated

1 ACCEPTED SOLUTION

Accepted Solutions

Re: filtering RIP routes into ospf

read the below link

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/route_maps.html

Sent from Cisco Technical Support iPad App

5 REPLIES

Re: filtering RIP routes into ospf

read the below link

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/route_maps.html

Sent from Cisco Technical Support iPad App

New Member

Re: filtering RIP routes into ospf

andrew

many thanks for the reply

i'll have a look at the config examples in the link and test it

thanks for your reply

Re: filtering RIP routes into ospf

Np -glad to help.

New Member

Re: filtering RIP routes into ospf

andrew

got it sorted

i was using an extend acl rather than a simple standard list

thanks for your help

gratefully appreciated

Re: filtering RIP routes into ospf

Good work - no problem, glad to help.

426
Views
0
Helpful
5
Replies
CreatePlease login to create content