I have a client that now requires fips-140-2 compliance. In looking at other post as well as cisco's site. I'm have trouble determining if I need to purchase a fips enclosure in conjunction with the fips labels?
This document does speak to the asa5505 - http://www.cisco.com/en/US/docs/security/asa/asa70/hw/fips_asa.htm
This doc speaks to the asa5505 and wants to install a case - http://www.cisco.com/en/US/docs/security/asa/hw/maintenance/5505guide/install.html
Yes. We have all set to use ASA 5500 series appliances as a FIPS -140-2 Compliant. But you have use the settings defined for FIPS compliance like it should be in single context mode, asa should be in routed mode, fips has to be enabled, password recovery has to be disabled, register value has to be set to skip the rommon mode while booting.... etc.
Please check for the latest IOS which is approved by FIPS.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...