Firewall 515E Start Monitor mode

[shams_ejaz]

Due to power failed two three times the Firewall PIX 515E is starting in monitor mode what to do now?. I tried to download the IOS image by TFTP Command in monitor mode but it is hanging & not connecting TFTP Server.

[JORGE RODRIGUEZ]

Hi Shams, have you tried in monitor mode

"reaload" to see if pix code loads .

When you said it hangs, before that can you ping tftp server before download?

[shams_ejaz]

Thanks for your reply ! yes i tried to ping its pinging the TFTP Server . and reload cammand also do the soft reboot.

Please advice further,

Thanks,

Shams

[JORGE RODRIGUEZ]

Do you have smartnet on this pix? given that you have tried tftp new code but pix hangs in the process, you may need to rma it, was this pix power surge protected during power failures, open a TAC case.