Hi, In my organisation there are 5 Vlans and all are configured on switch and this is a L3 switch and each one is connected L2 switch and I have make multipal V-lan on L2 switch as well and I have make all route entries on L3 Switch. In this scneario Do i need to do any setting on firewall to access the internet all Vlan machine.
As long you have in L3 switch default route pointing to ASA inside interface, AND, that in asa you have global(outside) 1 interfacenat(inside) 1 0 0 plust a default route, all your L3 SVI subnets should get outbound internet access.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...