Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Firewall Logging level identification

i have some Firewall log IDs:

logging message 106100

logging message 106001

logging message 106002

logging message 106006

logging message 106007

logging message 106010

logging message 106012

logging message 106013

logging message 106014

logging message 106015

logging message 106016

& how can i know which logging level these IDs belong , is it informational or debugging or what ?

-is there any show command on the firewall to show me that?

  • Firewalling
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Firewall Logging level identification

Go to this link, pick your version of code running to reference the level of severity.

Generally you will see %PIX|ASA-X at the begining of loggin message where X is the severity level from 1 to 7

106100 severity 4

106001 severity 2

106002 severity 2

106006 severity 2

106007 severity 2

106010 severity 3

106012 severity 6

106013 severity 2

106014 severity 3

106015 severity 6

106016 severity 2

•Alert Messages, Severity 1

•Critical Messages, Severity 2

•Error Messages, Severity 3

•Warning Messages, Severity 4

•Notification Messages, Severity 5

•Informational Messages, Severity 6

•Debugging Messages, Severity 7

http://www.cisco.com/en/US/products/ps6120/products_system_message_guides_list.html

is there any show command on the firewall to show me that?

You have to reference the list of messages in above link, PIX/ASA will not explain the error message through cli.

Regards

2 REPLIES

Re: Firewall Logging level identification

Go to this link, pick your version of code running to reference the level of severity.

Generally you will see %PIX|ASA-X at the begining of loggin message where X is the severity level from 1 to 7

106100 severity 4

106001 severity 2

106002 severity 2

106006 severity 2

106007 severity 2

106010 severity 3

106012 severity 6

106013 severity 2

106014 severity 3

106015 severity 6

106016 severity 2

•Alert Messages, Severity 1

•Critical Messages, Severity 2

•Error Messages, Severity 3

•Warning Messages, Severity 4

•Notification Messages, Severity 5

•Informational Messages, Severity 6

•Debugging Messages, Severity 7

http://www.cisco.com/en/US/products/ps6120/products_system_message_guides_list.html

is there any show command on the firewall to show me that?

You have to reference the list of messages in above link, PIX/ASA will not explain the error message through cli.

Regards

New Member

Re: Firewall Logging level identification

Thanks very much for useful reply , i found what i need .

but for these four remaining log messages i can't found them

106019

302001

302007

302008

321
Views
0
Helpful
2
Replies
This widget could not be displayed.