Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Fixup equivalent in ASA 5510

Hi All,

I am upgrading PIX 506E 6.3(5) to ASA 5510 8.0(3). The PIX has the following commands:

no fixup protocol h323 h225 1720

no fixup protocol h323 ras 1718-1719

no fixup protocol smtp

My customer has Avaya VoIP system and Microsoft Exchange Server installed.

With the upgrade to ASA 5510 running 8.0(3), will the inspect part of the ASA 8.0(3) shown below produce the same result as the no fixup protocols included in the current PIX 6.3(5) config?

policy-map global_policy

class inspection_default

inspect dns preset_dns_map

inspect ftp

inspect h323 h225

inspect h323 ras

inspect rsh

inspect rtsp

inspect esmtp

inspect sqlnet

inspect skinny

inspect sunrpc

inspect xdmcp

inspect sip

inspect netbios

inspect tftp

Has anyone handled a scenario like this one? Any ideas? Any show stoppers?

Thanks for your help.

4 REPLIES
Green

Re: Fixup equivalent in ASA 5510

policy-map global_policy

class inspection_default

no inspect h323 h225

no inspect h323 ras

no inspect esmtp

Community Member

Re: Fixup equivalent in ASA 5510

Whats the proper syntax to make this change on a ASA 5520? Thanks.

Re: Fixup equivalent in ASA 5510

Hi,

Proper syntax is same as suggested by acomiskey, just copy paste the following commands :-

policy-map global_policy

class inspection_default

no inspect h323 h225

no inspect h323 ras

no inspect esmtp

Regards

Parminder Sian

Community Member

Re: Fixup equivalent in ASA 5510

Thanks, I got the answer in another post.

6693
Views
0
Helpful
4
Replies
CreatePlease to create content